Product performance:

Features:

• Small volume ratio: the volume ratio of our special carbon felt is 0.08-0.12g / cm3, the general acrylic carbon felt volume ratio is 0.15-0.17 g / cm3, the same specification of carbon felt is lighter;
• High strength: The production process and method are improved. The fiber is oxidized and drawn, the strength is ≥200Mpa, and the Acrylic fiber fineness is 1.22dtex, much smaller than ordinary acrylic, so the fiber strength of the felt raw material before carbonization is increased.
• During further high-temperature carbonization, the shrinkage and weight loss are less than about 50% of ordinary acrylic carbon felt, and the width reaches 1.50 meters.
• Carbon felt is soft: flexible, foldable, and not easily deformed by twisting.
• Clean Appearance: the carbon felt has no carbon black appearance, and will not produce carbon foam and carbon slag due to operation, and is not prone to harsh environmental problems.
• According to the customer's purpose, it can produce the carbon felt of its related industries (for structural materials, thermal insulation, conductive).

Carbon fiber felt advantage

Small heat capacity
Low thermal conductivity
Good thermal insulation performance
Lightweight, soft texture
Quickly heat up
Cool down, quench, heat, and does not deform
Especially under high-temperature conditions

Carbon Felt​ Technical index:

Carbon Felt​ Application:

Vacuum sintering furnace
Single-crystal furnace resistance furnace
High-pressure furnace
Induction furnace, etc;

Carbon-carbon composite, carbon-carbon structure enhancement, carbon-carbon graphite material; conductive carbon, shielding, heating carbon material.

Carbon felt used in vacuum furnaces and inert gas furnace insulation materials, hot gas or liquid and molten metal filters, fuel cell porous electrodes, catalyst carriers, corrosion-resistant container composite linings, carbon-carbon composite materials, and electric heating.

Carbon Felt​ Specifications:

Length (m) ≤20

Width (m) ≤1.4

Thickness (mm) 3-18

It can be cut according to customer requirements.

Hunan MTR New Material Technology Co., Ltd. (formerly Zhuzhou Green Carbon Fiber Products Co., Ltd.) is a high-temperature furnace thermal insulation material production plant! Our company adheres to the corporate philosophy of singularity, focus and professionalism, and is committed to the continuous development and application of thermal insulation material technology.

The company’s main products include graphite hard felt, reinforced composite hard felt, multi-type composite hard felt (made in an overall shape), graphite felt, high-temperature carbon felt, and other thermal field insulation materials. The rigid felt series have a rigidity that traditional insulation materials do not have. Supporting, high strength, no short fiber shedding, low thermal conductivity and other advantages, more energy-saving, environmentally friendly, easy to disassemble, easy to maintain, and can extend the service life of the high-temperature furnace. The product is suitable for all kinds of high-temperature vacuum furnace equipment (such as: single crystal growth furnace, polycrystalline casting furnace, polycrystalline reduction furnace, polycrystalline ingot furnace, vacuum sintering furnace, hot pressing furnace, heat balance furnace, electromagnetic induction furnace, medium and high-frequency Induction furnaces, non-oxidizing atmosphere high-temperature equipment, high-purity silicon hydrogenation furnaces, etc.) are widely used in solar energy, vacuum metallurgy, new chemical materials, atomic energy, semiconductors, new electronic energy and other fields.

Customized drawings can be made to produce various non-standard and special-shaped geometric shapes such as flat plates, discs, cones (discs), and cylinders! Can provide the overall installation service of the hot cell.